THE 4-STROKE ADVANTAGE
• No OilMixing Simplifies Operation and PreventsEngine Failure Due to
ImproperMix
• Eliminatesthe Need forSeparateMixed Oil/FuelCan
• Lower Noise at 106.5 dB(A) and Smoother Idle forContinuous Operation
• LowerFuelConsumption at .45 Gallons Per Hour
• Reduced Exhaust and Intake Carbon Build-Up forLongerCylinderLife
• Three Ring Piston for Improved CommercialEngine Durability

• Automatic engine decompression valve is engineered into the cam gear to reduce pull start force by 40%
• Five-stage, foam-paper-nylon filtration system with advance direction air flow provides cleaner air for better engine durability
• Integrated wheels reduce fatigue during long straight cuts and retract when not in use to prevent unexpected movement
• Clear primer bulb facilitates fuel delivery to the carburetor for easier cold starts
• Pressure compensated carburetor with vented choke plate is engineered to reduce flooding by automatically adjusting to deliver the proper amount of fuel
• Advanced oil separation & lubrication system to improve valve train durability and engine life
• Specially treated rods, followers and valves minimize wear and extend engine life
• Single lever On-Off-Choke operation switch for operator convenience
• Shielded exhaust outlet and larger spark arrestor screen prevents contaminates from restricting air flow
• External fuel tank vent eliminates pressure build up Sealed cartridge recoil starter rope reduces wear by keeping out dust and debris
• Cutting arm easily changes from center position to flush (outboard) position allowing cuts directly adjacent to curb edges, wall or directly above the ground
• Cushioned operator grips with 4 vibration-absorption rubber buffers for increased operator comfort STANDARD EQUIPMENT
• Wrench (782236-0)
• Torx Wrench (782025-3)
• Screwdriver (783012-5)
• Adapter ring (20 mm to 1″) (394-228-121)
• Tool kit (195488-8)
• Oil bottle (7.44 oz.) (195532-1)
• Water supply kit (195533-9)

• Engine displacement 4.6 cu.in. (76 cc.)
• Maximum power 4.1 HP / 3.0kW
• No load speed 9,350 RPM
• Max spindle speed 4,300 RPM
• Fuel Unleaded gasoline
• Fuel tank capacity 37 oz.
• Arbor 20mm/1” Adapter
• Wheel diameter 14″
• Maximum cutting depth 4-13/16″
• Dry weight 28.4 lbs.
• Shipping weight 35.2 lbs.
• UPC code 088381-620017